Isover Cavitybatt glass wool has been specially developed for use within steel frame structures, timber frame buildings and dry wall systems. Cavitybatts are m…
Available branchesChoose a branch near you · set your location to rank by distance
Orders go to Muthokinju · 0799929975. Pay the shop directly. Skyhat does not collect product payments.
Glass Wool Cavity Batt ISOVER – Advantages
Lifelong energy savings
Exceptional acoustic properties
Lightweight and easy to handle
Maintenance free
Long product life – will not readily age
Self-supporting – will not sag
Compression packed – to reduce volume and
Optimize transport and storage
High tear strength yet readily cut with a sharp blade
QUALITY MANAGEMENT SYSTEM
Less material, less energy and less emissions
Zero ozone depleting potential (ODP)
Zero global warming potential (GWP)
FIRE PROPERTIES
Non-combustible – tested to SANS 10177 Part 5
Class A1, s1, d0 according to EN 13823
EUROCLASS A1 – EN 13501-1
THERMAL PROPERTIES
Contributes to indoor comfort and lifelong energy savings by reducing heat loss/gain due to the inherent thermal insulation properties. A dry wall system correctly designed and insulated will offer the same or better thermal properties than a conventional brick and mortar construction.
ACOUSTIC PROPERTIES
Offers exceptional acoustic properties and enhances indoor environmental quality by absorption of noise. Isover insulation reduces sound transmission to and from a room or building. A dry wall system correctly designed and insulated will offer the same or better acoustical properties than a conventional brick and mortar construction.
APPLICATIONS
Steel frame buildings
Timber frame structures
Dry wall systems
Designed for use in cavity walls but may effectively be used on top of ceilings, along the roofline, or within masonry wall cavities
DURABILITY
Odourless, inert and fully compatible with all standard building materials and components
Will not promote corrosion of steel, copper or aluminium
Will not sustain vermin
Will not breed or promote fungi, mould or bacteria
Non-hygroscopic
HANDLING & STORAGE
Store product under cover and in dry conditions. Store flat. Handle with care, especially on the edges and corners, which can be damaged if subject to sharp or heavy impact. Do not apply excessive pressure, for example by standing or sitting on the product, as permanent damage may be caused.
TOOLS NEEDED FOR INSTALLATION
Batts are designed around the frame/stud system for ease of installation, therefore minimal tools are required. A sharp knife/blade will come in handy for off-cuts and for slitting batts to fit over piping and conduits.
INSTALLATION INSTRUCTIONS
Open packaging allowing space for the initial immediate recovery of compressed product.
Push individual batts firmly into the cavity space with glass tissue facing on the exposed side.
Use a sharp knife to slit the Cavitybatt to encapsulate piping/conduits.
Use a sharp knife to cut batt around any plug points.
Make sure that there are no gaps, which will cause thermal and noise leakage.
GLASS WOOL ISOVER – ARCHITECTURAL SPECIFICATION
Install (51/63/100/102) mm thick self-supporting noncombustible lightweight, glass tissue faced Glasswool “Cavitybatt insulation”, offering a thermal resistance value of (1.34/1.66/2.63/2.68) m2 .K/W for heat and/ or acoustic control. Install strictly in accordance to manufacturer’s detail and specification.
CUSTOMER FEEDBACK
Reviews & comments
Be the first to review Glasswool Insulation Batt 100mm.
No reviews yet. Share how this product worked on your project.
