Glasswool Insulation Acoustic Slab 50mm

Glass Wool Cavity Batt ISOVER – Advantages

• Lifelong energy savings

• Exceptional acoustic properties

• Lightweight and easy to handle

• Maintenance free

• Long product life – will not readily age

• Self-supporting – will not sag

• Compression packed – to reduce volume and

• Optimize transport and storage

• High tear strength yet readily cut with a sharp blade

QUALITY MANAGEMENT SYSTEM

• Less material, less energy and less emissions

• Zero ozone depleting potential (ODP)

• Zero global warming potential (GWP)

FIRE PROPERTIES

• Non-combustible – tested to SANS 10177 Part 5

• Class A1, s1, d0 according to EN 13823

• EUROCLASS A1 – EN 13501-1

THERMAL PROPERTIES

Contributes to indoor comfort and lifelong energy savings by reducing heat loss/gain due to the inherent thermal insulation properties. A dry wall system correctly designed and insulated will offer the same or better thermal properties than a conventional brick and mortar construction.

ACOUSTIC PROPERTIES

Offers exceptional acoustic properties and enhances indoor environmental quality by absorption of noise. Isover insulation reduces sound transmission to and from a room or building. A dry wall system correctly designed and insulated will offer the same or better acoustical properties than a conventional brick and mortar construction.

APPLICATIONS

• Steel frame buildings

• Timber frame structures

• Dry wall systems

• Designed for use in cavity walls but may effectively be used on top of ceilings, along the roofline, or within masonry wall cavities

DURABILITY

• Odourless, inert and fully compatible with all standard building materials and components

• Will not promote corrosion of steel, copper or aluminium

• Will not sustain vermin

• Will not breed or promote fungi, mould or bacteria

• Non-hygroscopic

HANDLING & STORAGE

Store product under cover and in dry conditions. Store flat. Handle with care, especially on the edges and corners, which can be damaged if subject to sharp or heavy impact. Do not apply excessive pressure, for example by standing or sitting on the product, as permanent damage may be caused.

TOOLS NEEDED FOR INSTALLATION

Batts are designed around the frame/stud system for ease of installation, therefore minimal tools are required. A sharp knife/blade will come in handy for off-cuts and for slitting batts to fit over piping and conduits.

INSTALLATION INSTRUCTIONS

• Open packaging allowing space for the initial immediate recovery of compressed product.

• Push individual batts firmly into the cavity space with glass tissue facing on the exposed side.